top of page
Tekniker

P0617 error code indicates high voltage in the starter relay circuit

The P0617 error code is a general fault code that indicates high voltage in the starter relay circuit. starter relay is an electrical switch that enables the vehicle to be started. The starter relay circuit includes the battery, ignition switch, fuses, starter motor, starter solenoid, starter relay and other safety components.




The causes of the P0617 error code may be:

  • Starter relay, starter motor, ignition switch or fuses are faulty or damaged

  • starter relay Damaged, cut, shorted or loose wiring, connections or connectors in the circuit

  • Battery overcharging or corrosion

  • System voltage is high

  • PCM is faulty or needs to be reprogrammed



Symptoms of the P0617 error code may include:

  • Engine fault light on

  • Starter not working or working poorly

  • Rattling noise coming from the starter motor

  • Entering the vehicle into safe mode


P0617

How to detect error code P0617? You can follow the steps below:

  • Read and save fault codes from vehicle memory with OBD-II scanner

  • Check vehicle history, service records and driver complaints

  • Clear fault codes and take the vehicle for a test drive

  • If the fault code reoccurs, check the power and ground connections to the PCM.

  • starter relay Visually inspect all components, wires and connectors of the circuit and check for any damage, cuts, shorts or looseness

  • Use the appropriate tester to test the starter relay, starter motor, ignition switch and fuses.

  • Make necessary repairs or replacements



To fix the P0617 error code, you can:

  • Repair or replace starter relay, starter motor, ignition switch or fuses

  • starter relay Repair or replace wiring, connections or connectors in circuit

  • Charge, clean or replace the battery

  • Check system voltage and repair or replace charging system components if necessary

  • Repair or reprogram PCM

  • Clear fault codes and take the vehicle for a test drive


The P0617 error code is quite important because high voltage in the starter relay circuit can affect the vehicle's starting, performance and efficiency. Also, the starter relay circuit fault may cause the vehicle to not start at another time. Therefore, if you see this fault code, you should take your vehicle to a specialist as soon as possible.



Things to consider regarding the P0617 error code are:

  • If the PCM is faulty or damaged, check if your vehicle is under warranty. In some cases, replacing this component may be free.

  • starter relay Before checking all components of the circuit, fully charge the battery and clean and tighten the battery cables. This may prevent some false readings.

  • To find the problem in the starter relay circuit, use a multimeter or test light and measure the voltage and resistance in the circuit. Locate and repair any opens, shorts or looseness in the circuit.



Commenti


bottom of page